Re: Sanyo Motor

Jerry,

Sherline sells a size 23 motor that measures 2 1/8 in long.
They refer to it as a 100 oz-in motor, however,the mfg.
(Shinano P/N SST57D3201) show 9.7 kg-cm holding torque in
their spec sheet which would be about 135 oz-in.
I have them on my Sherline 5400 mill, and they seem to
be just about the right size.

Hope this helps,
Al

PS These motors are 3.2V; 2.0 A
al


--- In CAD_CAM_EDM_DRO@y..., "Carol & Jerry Jankura"
<jerry.jankura@s...> wrote:

> It's a size 23 mount, approximately 2 1/2 inches deep.
>
> -- Carol & Jerry Jankura
> Strongsville, Ohio
> So many toys, so little time
>