Re: [CAD_CAM_EDM_DRO] Re: cutting mirror

And make a lot of noise
Sven Peter

yahoo@... wrote:

> An air motor mounted on the spindle would give you 60 to 90,000 rpm.
> They are light, fast and inexpensive motors.
>
> MAXNC (www.maxnc.com) sells an air spindle for their mill.
>
> Buck
> --- In CAD_CAM_EDM_DRO@y..., george@f... wrote:
> > Is it possible to mill mirror?
> > If so, how?
> >
> > T.I.A.
> > Geo.
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]