Re: Allegro delay

> No, this may not work. The pullup should be on the driving side of
> the network, and should be much lower than 10K so that a fast rise
> is developed to quickly turn off the driver that is on. If the 10K

is at

> the output, then it creates a voltage divider such that the input to
> the UDN2961 can only be lowered to about 1.6 V, which is probably
> a forbidden level. Put a 510 Ohm or so resistor pullup at the

output

> of the 5804 and you should get proper operation.
>
> Jon

This makes sense now Jon, glad I checked back with you.
Thanks much,
Lonnie