Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Posted by
Jon Elson
on 2001-06-18 23:53:41 UTC
"Fitch R. Williams" wrote:
specifically the RS-274D entry, which lists a bunch of the major G-codes.
The canned cycles, misc functions, and a bunch of other things are not
standardized at all between controls, and can be VASTLY different from
one brand to another.
Jon
> On Tue, 19 Jun 2001 02:12:47 +0000, Jon Elson <elson@...>Take a look at http://206.19.206.56/cadfaq.htm for some useful info,
> wrote:
>
> >Unless they are using the exact same executive and configuration as you
> >are, not ONLY the same CNC control, such a list would be of no use.
> >Canned cycles are not standard G-code, except in the most cursory
> >manner.
>
> Jon,
>
> Apparently I wasn't all that clear. I am interested in more than the
> canned cycles, I don't have the syntax for all the "G" code commands
> either. I don't even know how many of them there are in this machine.
specifically the RS-274D entry, which lists a bunch of the major G-codes.
The canned cycles, misc functions, and a bunch of other things are not
standardized at all between controls, and can be VASTLY different from
one brand to another.
Jon
Discussion Thread
Jon Elson
2001-06-18 23:53:41 UTC
Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Jon Elson
2001-06-18 23:59:06 UTC
Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Fitch R. Williams
2001-06-19 06:00:19 UTC
Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Marty Escarcega
2001-06-19 06:15:35 UTC
Fitch's Mill Anilam Crusader II milling machine control.
dougrasmussen@c...
2001-06-19 07:19:20 UTC
Re: List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Fitch R. Williams
2001-06-19 07:59:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Fitch R. Williams
2001-06-19 08:04:47 UTC
Re: [CAD_CAM_EDM_DRO] Fitch's Mill Anilam Crusader II milling machine control.
hllrsr@c...
2001-06-19 14:50:32 UTC
Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.
Fitch R. Williams
2001-06-19 16:23:19 UTC
Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.
ballendo@y...
2001-06-20 02:07:45 UTC
Re: List of commands for a 1983 vintage Anilam Crusader II milling machine control.