Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.

Fitch,
I learned CNC on a pair of Anilam machines, 1200 lathe controller and
the 1500 mill.

Somewhere in my filing system I have the G,M, and Canned cycle codes for
all of the Anilam (or should that be ANALam? <gr> Fanuc is SO much
nicer) controllers.
I'll try to pull them out and send them along.

BTW, if your local dealer is not such a pleasant person, try H.H.
Roberts in Toronto, Ontario. They are very nice to deal with, in fact
that is who gave the codes to me.

Iain

Fitch R. Williams wrote:

> So I'm finding out! I have received several E-mail references to
> pages with ISO code listings. The G8n series seem to be relatively
> standard, as are G00, G01, G02, and G03. G04 is a pause, but no time
> duration specification is permitted - one must hit the green button to
> go again - a feature on this machine where there are manual tool
> changes. I have gotten most of the canned cycles decoded. This
> machine has no spindle or coolant commands since they are done
> manually. The spindle is wired to a relay that will kill it if one
> hits the E-stop.
>
> Fitch
> In So. Cal.
>
> The FAQ for RCM is: http://w3.uwyo.edu/~metal
> Metal Web News at http://www.metalwebnews.com
> The "Drop Box" is at http://www.metalworking.com/
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/