Re: [CAD_CAM_EDM_DRO] List of commands for a 1983 vintage Anilam Crusader II milling machine control.

On Tue, 19 Jun 2001 07:01:55 +0000, Jon Elson <elson@...>
wrote:

>and, another nonstandard one! Most systems use M02 or M30 for this.

So I'm finding out! I have received several E-mail references to
pages with ISO code listings. The G8n series seem to be relatively
standard, as are G00, G01, G02, and G03. G04 is a pause, but no time
duration specification is permitted - one must hit the green button to
go again - a feature on this machine where there are manual tool
changes. I have gotten most of the canned cycles decoded. This
machine has no spindle or coolant commands since they are done
manually. The spindle is wired to a relay that will kill it if one
hits the E-stop.

Fitch
In So. Cal.

The FAQ for RCM is: http://w3.uwyo.edu/~metal
Metal Web News at http://www.metalwebnews.com
The "Drop Box" is at http://www.metalworking.com/