Re: [CAD_CAM_EDM_DRO] laser transit

Doug:

If you have a decent carpenter's level at least 30" long, that is ALL you
need! I assure you, the controlling computer will NOT be offended if one
corner of your machine is a couple of ten-thousandths of an inch lower than
the other three corners! Really!

If the table is not some kind of optical device, or giant mirror-grinder, it
makes NO difference, so long as the four or six legs support about the same
portion of the total weight.

Lotsa luck!


[Non-text portions of this message have been removed]