Re: [CAD_CAM_EDM_DRO] CAM Expert software

two words: VECTOR CAM

or is it "one" word VECTORCAM ??

either way, it's your best option regarding your question............

cl

Alan Marconett KM6VV wrote:

> Hi Ron,
>
> It's been posted many times, but I'd recommend you check out Fred's
> Vector CAD offer (I think it's still on), and then use the free ACE
> converter (and CNCpro controller) from Yeager. Or a simple free CAD
> program. Check the previous posts. At $240 for CAM Expert, you are not
> much cheaper then Vector CAD/CAM. I KNOW that is supported!
>
> http://www.ribbonsoft.com/index.php3
>
> I notice they have a free Linux vers. And some GERBER support.
>
> Alan KM6VV
>
> ron_routledge@... wrote:
> >
> > Hi Group
> >
> > I was wondering if anyone has used CAM Expert by Ribbonsoft. We are
> > building a 4x8 gantry for plasma cutting and need a simple drawing
> > and CAM program. I have E-mailed the site a couple of times with no
> > response so I a bit nrevous. It seems to work well (the demo) but I
> > haven't figured out how to do kerf compensation.
> >
> > If not this software what would you all reccomend to use as a drawing
> > and Cam software. This needs to be as simple as possible so the
> > machine can be used with minimal training.
> >
> > Thanks
> >
> > Ron Routledge
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/