RE: [CAD_CAM_EDM_DRO] CAM Expert software

Hi
Check out the Oshin 2D cnc programmer, the demo lets you create usable files
(I think there is a line limit though). I used this to create gcode from dxf
files for a long while while building and testing my foam cutter.

Cheers


Coert vd Sandt




-----Original Message-----
From: ron_routledge@... [mailto:ron_routledge@...]
Sent: Wednesday, August 01, 2001 4:15 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] CAM Expert software


Hi Group

I was wondering if anyone has used CAM Expert by Ribbonsoft. We are
building a 4x8 gantry for plasma cutting and need a simple drawing
and CAM program. I have E-mailed the site a couple of times with no
response so I a bit nrevous. It seems to work well (the demo) but I
haven't figured out how to do kerf compensation.

If not this software what would you all reccomend to use as a drawing
and Cam software. This needs to be as simple as possible so the
machine can be used with minimal training.

Thanks

Ron Routledge


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Confidentiality Warning
=======================
The contents of this e-mail and any accompanying documentation
are confidential and any use thereof, in what ever form, by anyone
other than the addressee is strictly prohibited.