CAD CAM EDM DRO - Yahoo Group Archive

Re: 5c spindle

on 2001-08-06 08:16:50 UTC
Hi Jon,

Let me get this straight....you took the spindle out of the spin
indexer and made a new housing to contain the ball bearing'ed
spindle? In other words, did you just use the spindle and nothing
else from the spin indexer?

Sounds like an inexpensive way to get a 5C mount.

thanks for the post,

Doug

-- In CAD_CAM_EDM_DRO@y..., Jon Anderson <janders@n>
> I made a bench grinder out of one of these. Saw one in HSM years
ago,
> finally got around to making my own. I don't recall off the top of
my
> head what the size was, but it was a light press fit into standard
> bearings available from MSC. I run mine up to 3000 rpm all the time.
> This, btw, allows mounting grinding, buffing, wire wheels, etc on
> mandrels which can be changed very quickly via handwheel drawbar,
and
> don't need to be trued each time for normal offhand grinding.
>
> Jon

Discussion Thread

eheil@s... 2001-08-05 21:36:47 UTC 5c spindle phrh@w... 2001-08-06 03:07:00 UTC Re: 5c spindle Jon Anderson 2001-08-06 06:52:34 UTC Re: [CAD_CAM_EDM_DRO] Re: 5c spindle dougrasmussen@c... 2001-08-06 08:16:50 UTC Re: 5c spindle Marcus & Eva 2001-08-06 08:32:31 UTC Re: [CAD_CAM_EDM_DRO] 5c spindle Jon Elson 2001-08-06 10:31:21 UTC Re: [CAD_CAM_EDM_DRO] 5c spindle JanRwl@A... 2001-08-06 14:27:26 UTC Re: [CAD_CAM_EDM_DRO] 5c spindle JanRwl@A... 2001-08-06 14:29:51 UTC Re: [CAD_CAM_EDM_DRO] 5c spindle Smoke 2001-08-06 15:51:03 UTC Re: [CAD_CAM_EDM_DRO] 5c spindle Jon Anderson 2001-08-06 17:12:43 UTC Re: [CAD_CAM_EDM_DRO] Re: 5c spindle