RE: [CAD_CAM_EDM_DRO] BDI Steppermod gives following errors

Tim,

Nope, I checked and the emc.ini file is set to steppermod.o, this was the
first thing I thought of too. The real problem, beside not being able to
use the machine, is how over the course of a simple machine off, estop on,
exit emc, restart emc 5 minutes later did this occur?

Thanks,

John

> -----Original Message-----
> From: Tim [mailto:timg@...]
> Sent: Thursday, August 23, 2001 12:07 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] BDI Steppermod gives following errors
>
>
> I would venture that you are using freqmod?? If so you have to tune the
> PID parameters as if it was a servo. To start with try bumping up your P
> value.
>
> BTW, are you trying to get an axis to travel faster than you had it
> running previously?
>
> Tim
> [Denver, CO]
>
> > -----Original Message-----
> >
> >
> > I have a new problem that just started this morning. I have
> > been happily running the BDI EMC setup, with the patch that
> > came out a couple of weeks ago applied. Everything has been
> > working just fine until this morning. I brought EMC up.
> > every thing was kul then on the next time I started it every
> > time I try to move any axis I get an error box popped up
> > saying I have a following error. I changed nothing, what is
> > causing this and how do I fix it?
> >
> > John Guenther
> > 'Ye Olde Pen Maker'
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>