CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNC Test File

on 2001-08-24 21:27:18 UTC
Art,

Just ran the test file on my CNC Router, servo motors, Gecko 340's
EMC, AMD450, 32 meg ram. 3 min 30 sec. Although it did make a few
noises I never heard before, it was generally smooth. Is this pretty
much just testing the accereration of a system? Since feedrate should
be the same on all machines, that should be the only variable, right?
Might not really be a good test unless it is tested on the same machine
with different controllers.

Bill


> Hi Guys:
>
> I just posted a file which was sent to me that apparently was used at
NAMES to test the smoothness and speed of various controllers. Does anyone
know how fast your controllers are on this file?
>
> I am about to release Master5ATP which is a completely redone system using
Asyncrounous pulseing and Trajectory planning. I used this file to test the
system and was wondering just how good a system is supposed to run this. I
get about 5 Minutes 34 seconds for the complete cut and very smooth. I am
curious just how fast other systems can run this, so if your really bored,
let me know.
>
> Thanks
> Art
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Art Fenerty 2001-08-24 15:52:03 UTC CNC Test File cncdxf@a... 2001-08-24 16:30:00 UTC Re: CNC Test File William Scalione 2001-08-24 21:27:18 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Jon Elson 2001-08-24 23:26:04 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Art Fenerty 2001-08-25 04:27:08 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Art Fenerty 2001-08-25 04:28:56 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Fred Smith 2001-08-25 04:46:54 UTC Re: CNC Test File Art Fenerty 2001-08-25 04:53:42 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC Test File Art Fenerty 2001-08-25 04:58:24 UTC Re: [CAD_CAM_EDM_DRO] Re: CNC Test File Jon Elson 2001-08-25 11:04:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: CNC Test File Art Fenerty 2001-08-25 11:16:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: CNC Test File Alan Marconett KM6VV 2001-08-25 11:18:18 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Art Fenerty 2001-08-25 17:03:22 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Ray 2001-08-25 17:22:31 UTC Re: Re: Re: Re: CNC Test File info.host@b... 2001-08-25 17:30:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: CNC Test File Tom Eldredge 2001-08-27 10:14:50 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Jon Elson 2001-08-27 11:39:16 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File Chris L 2001-08-27 19:38:46 UTC Re: [CAD_CAM_EDM_DRO] CNC Test File