Re: Tapping Heads

I can run my mill drill at 120 IPM with the servo-lite system but speed
kills so I have slowed it down to a nice 60 IPM
Dan
-----Original Message-----
From: Jon Elson <jmelson@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Tuesday, October 05, 1999 9:51 PM
Subject: Re: [CAD_CAM_EDM_DRO] Tapping Heads

>From: Jon Elson <jmelson@...>
>
>
>
>Dan Mauch wrote:
>
>> From: "Dan Mauch" <dmauch@...>
>>
>> Jon 800 IPM is nothing. In the a CNC magazine they are talking about 2300
>> IPM!
>
>2300 IPM on lightweight optical stages is not too surprising. But, I can't
>imagine a large milling machine moving that fast.
>Ahh, I see where the odd number comes from, ~ 1 M/S.
>Anyway, that's 191 FPM, or just over 2 Mi/Hr, which doesn't seem all that
>fast. Still, my machine rocks when it accelerates to 100 IPM, I wouldn't
>want to go much faster.
>
>Jon
>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>