Re: [CAD_CAM_EDM_DRO] EMC with Stepperworld Parallel Card

Alan - it appears to be a step/direction board. With some help from Ray, I
think I'll have it running later on this afternoon. I've got to switch a few
pins around coming from the parallel port into the Stepperworld board, but
that appears to be it.

I'll keep ya posted!

Thanks,

Matt

-----Original Message-----
From: Alan Marconett KM6VV <KM6VV@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Wednesday, September 12, 2001 2:08 PM
Subject: Re: [CAD_CAM_EDM_DRO] EMC with Stepperworld Parallel Card

>Hi Matt,
>
>I'm wondering if the StepperWorld driver card is step/dir or 4-phase?
>Does BDI support 4-phase?
>
>Alan KM6VV
>
>
>Matthew King wrote:
>>
>> Has anyone made EMC work with the Stepperworld Unipolar Parallel Driver
>> card? I bought their little kit (card, current limiting resistors and 3

60

>> oz motors) off of ebay a while back, just to mess with. They may find

their

>> way onto my little Atlas horizontal mill one day, but I've got to get

them

>> working first!
>>
>> Anyhow, I was able to make them work with the software that StepperWorld
>> sent with them (VB stuff for windows) so I went ahead and installed the

BDI

>> 2.04 that I received from Ray several weeks ago.
>>
>
>> <SNIP>
>> Matt King
>> Columbus, GA
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>