Re: [CAD_CAM_EDM_DRO] Solidworks

I'm learning MasterCAM 8.1 at school. That program leave a lot to be
desired!
The training info manuals and tutorials leave out way too much information
required once you get past the "lessons" which merely tell you to fill out
the various dialog boxes as shown without telling you what some of them are
for.

Unfortunately too, the instructor isn't very well versed in MasterCAM
either and the dealer is generally pretty hard to get hold of for answers.

Unfortunately, I don't have the funds to buy MasterCAM (over $4000 I
understand) and Solidworks (also ove $4000). Plus I'd have to upgrade my
computer (cheap at $80 for the necessary memory) just to let Solidworks
operate.

About the only reason I could justify Solidworks would be ease of generating
assemblies which can be animated. From there I could generate 2D drawings
which could possibly be plugged into a simple (and cheaper) program for
generating the required code. I could even generate the code by hand if
necessary.

Smoke

> At 09:21 PM 9/25/2001 -0000, smoke@... wrote:
>
> >program but i didn't see anything that would allow it to generate
> >anything in the way of machine code for doing the actual machining.
>
> That would be called "Mastercam" :-) At least, that's what we use at

work.

> Solidworks is a solid modeling program, and can output IGES, STL,
> Parasolid etc. formats but does need a CAM "rear-end" program for a
> machining interface.
>
> >Anyone out there no more about it...or know of an on line users group?
>
> There is a Usenet newsgroup comp.cad.solidworks. Other than that, I don't
> know of any online groups.
>
> Best regards,
>
> Randy
>
> Randy Gordon-Gilmore ,----.___________ ______________ _________________
> ProtoTrains // = = === == || == == == = || == == == = ==

=|

> Rio Vista, CA, USA

/-O==O------------o==o------------o==o-----------o==o-'

> zephyrus@... http://www.rickadee.net/~zephyrus
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>