RE: [CAD_CAM_EDM_DRO] Solidworks

way cool! do you have a chart of these (off topic I know... its just
usefull) it's based off the old ascii numbers, insn't it?---Dave L.

-----Original Message-----
From: gab@... [mailto:gab@...]
Sent: Wednesday, September 26, 2001 5:56 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Solidworks


Alt 0162 = ¢



-----Original Message-----
From: dlantz@... [mailto:dlantz@...]
Sent: Wednesday, 26 September, 2001 8:03 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Solidworks


Hello all! my 2 cents (any one know the 3 digit number for the 'cent'
symbol... like alt 248 is °?)
anyhow, we use the solidworks & mastercam solution here. I would have to
second that the interface is really the worst i have ever used (for
mastercam) solidworks is ok, but has some bugs, like that it won't keep
subassemblies sorted out if you load multiple assemblies with the same part
names but different files (in other directories)... it will 'link' them. I
personally like Pro-E alot better, its more stable. Mastercam is WAY too
cryptic, and the interface is just dreadfull (think i mentioned that) I
would not recomend it to anyone.
(my 2 cents)
Dave L.

-----Original Message-----
From: smoke@... [mailto:smoke@...]
Sent: Tuesday, September 25, 2001 8:27 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Solidworks


I'm learning MasterCAM 8.1 at school. That program leave a lot to be
desired!
The training info manuals and tutorials leave out way too much information
required once you get past the "lessons" which merely tell you to fill out
the various dialog boxes as shown without telling you what some of them are
for.

Unfortunately too, the instructor isn't very well versed in MasterCAM
either and the dealer is generally pretty hard to get hold of for answers.

Unfortunately, I don't have the funds to buy MasterCAM (over $4000 I
understand) and Solidworks (also ove $4000). Plus I'd have to upgrade my
computer (cheap at $80 for the necessary memory) just to let Solidworks
operate.

About the only reason I could justify Solidworks would be ease of generating
assemblies which can be animated. From there I could generate 2D drawings
which could possibly be plugged into a simple (and cheaper) program for
generating the required code. I could even generate the code by hand if
necessary.

Smoke

> At 09:21 PM 9/25/2001 -0000, smoke@... wrote:
>
> >program but i didn't see anything that would allow it to generate
> >anything in the way of machine code for doing the actual machining.
>
> That would be called "Mastercam" :-) At least, that's what we use at

work.

> Solidworks is a solid modeling program, and can output IGES, STL,
> Parasolid etc. formats but does need a CAM "rear-end" program for a
> machining interface.
>
> >Anyone out there no more about it...or know of an on line users group?
>
> There is a Usenet newsgroup comp.cad.solidworks. Other than that, I don't
> know of any online groups.
>
> Best regards,
>
> Randy
>
> Randy Gordon-Gilmore ,----.___________ ______________ _________________
> ProtoTrains // = = === == || == == == = || == == == = ==

=|

> Rio Vista, CA, USA

/-O==O------------o==o------------o==o-----------o==o-'

> zephyrus@... http://www.rickadee.net/~zephyrus
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/