CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] German help

Posted by JanRwl@A...
on 2001-10-02 18:40:58 UTC
In a message dated 02-Oct-01 20:09:31 Central Daylight Time,
ka1bbg1@... writes:


> Nicht autoklavieren
> Nicht in losung einlegen
> Gas-Sterilisation moglich
>

Brian: Do not autoclave (don't boil!)
Do not lay in [a] solution
Gas Sterilisation possible.

It appears to be some kind of medical device.


[Non-text portions of this message have been removed]

Discussion Thread

brian 2001-10-02 18:08:21 UTC German help ccs@m... 2001-10-02 18:18:56 UTC Re: [CAD_CAM_EDM_DRO] German help JanRwl@A... 2001-10-02 18:40:58 UTC Re: [CAD_CAM_EDM_DRO] German help Sven Peter 2001-10-02 20:00:25 UTC Re: [CAD_CAM_EDM_DRO] German help Hugh Prescott 2001-10-02 20:03:11 UTC Re: [CAD_CAM_EDM_DRO] German help Jon Elson 2001-10-02 20:37:42 UTC Re: [CAD_CAM_EDM_DRO] German help brian 2001-10-03 15:52:46 UTC Re: [CAD_CAM_EDM_DRO] German help brian 2001-10-03 16:07:28 UTC Re: [CAD_CAM_EDM_DRO] German help brian 2001-10-03 16:10:36 UTC Re: [CAD_CAM_EDM_DRO] German help Jerry Kimberlin 2001-10-03 16:57:10 UTC Re: [CAD_CAM_EDM_DRO] German help