Re: [CAD_CAM_EDM_DRO] German help

ok, next time i have the digi camera out i will shoot a picture. cul brian
f.

----- Original Message -----
From: "Jon Elson" <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 02, 2001 11:46 PM
Subject: Re: [CAD_CAM_EDM_DRO] German help


> > From: "brian" <ka1bbg1@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Tuesday, October 02, 2001 8:22 PM
> > Subject: [CAD_CAM_EDM_DRO] German help
> >
> > > Hi gang, i have a device on the end of a cable, i think it might be an
> > ultrasonic head but it does have perhaps German writing on it. it's as
> > follows;
> > > Nicht autoklavieren
> > > Nicht in losung einlegen
> > > Gas-Sterilisation moglich
> > > It looks like a ultrasonic head with what appears to be a fitting for
gas
> > on one end and the other looks like something screwed into it. thanks,
brian
>
> I don't really speak German, but some of this is pretty obvious.
>
> 1. Do not Autoclave (in otherwords, avoid high pressure steam)
>
> 2. ?? Do not allow dirt inside ??
>
> 3. Gas Sterilization OK
>
> So, it looks like it is probably a medical pressure transducer. Blood
> pressure, breathing gas pressure, fluid pressure. it could also
> be a flow transducer, Oxygen saturation sensor, etc.
>
> Jon
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>