CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] German help

Posted by Sven Peter
on 2001-10-02 20:00:25 UTC
Stimmt genau!
excactly right!
Sven Peter

ccs@... wrote:
>
> > Nicht autoklavieren
> > Nicht in losung einlegen
> > Gas-Sterilisation moglich
>
> Don't autoclave. Don't put it in some kind of bath. Do gas sterilize.
>
> Not very helpfull, I'm afraid.
>
> Chris
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

brian 2001-10-02 18:08:21 UTC German help ccs@m... 2001-10-02 18:18:56 UTC Re: [CAD_CAM_EDM_DRO] German help JanRwl@A... 2001-10-02 18:40:58 UTC Re: [CAD_CAM_EDM_DRO] German help Sven Peter 2001-10-02 20:00:25 UTC Re: [CAD_CAM_EDM_DRO] German help Hugh Prescott 2001-10-02 20:03:11 UTC Re: [CAD_CAM_EDM_DRO] German help Jon Elson 2001-10-02 20:37:42 UTC Re: [CAD_CAM_EDM_DRO] German help brian 2001-10-03 15:52:46 UTC Re: [CAD_CAM_EDM_DRO] German help brian 2001-10-03 16:07:28 UTC Re: [CAD_CAM_EDM_DRO] German help brian 2001-10-03 16:10:36 UTC Re: [CAD_CAM_EDM_DRO] German help Jerry Kimberlin 2001-10-03 16:57:10 UTC Re: [CAD_CAM_EDM_DRO] German help