CAD CAM EDM DRO - Yahoo Group Archive

Re: Newall sperosyn encoders

Posted by Bill Griffin
on 2001-10-25 16:20:17 UTC
I have the Newall systems on my compact 8 lathe and knee mill, they
are great! I had posed this question ages ago here on the list. As I
recall, someone mentioned a chip that would make reading the scales
(tubes filled with precision ground balls) easier.

I also suggested using a MR head to read a magnetically encoded
scale in a similar fashion to a credit card encoding. Encoding
magnetic tape with the bits would be fairly easy if someone could
work out the readheads.

As I recall, someone mentioned a chip that would make reading the
scales (tubes filled with precision ground balls) easier.

http://www.grifftek.com/c8dro/c8dro.html

Bill Griffin




--- In CAD_CAM_EDM_DRO@y..., Alan Marconett KM6VV <KM6VV@a...> wrote:
> Hi Les, List,
>
> Neat idea! Who's going to try it? I wish I had more time for
projects!
>
> In a similar fashion, a long flat steel bar stock could have an
edge cut
> with a sinusoidal pattern. This could be "read" by a Hall-effect
> sensor? Seems one has to induce a magnetic field in the "sine
rack" (or
> balls) in order to "read" them.
>
> Alan KM6VV
>
>
> Les Newell wrote:
> >
> > Has anyone come across Newall spherosyn DRO encoders before?
> > The scale appears to be a tube filled with steel balls and the
position is
> > sensed magnetically. They have some info on their website
> > http://www.newall.co.uk/Spherosyn_Microsyn.htm but the
description of how
> > they work is a little vague. I wonder if this idea could be
copied for a
> > home-made DRO.
> >
> > Les
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

Les Newell 2001-10-25 14:13:09 UTC Newall sperosyn encoders Alan Marconett KM6VV 2001-10-25 14:30:23 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Bill Griffin 2001-10-25 16:20:17 UTC Re: Newall sperosyn encoders Smoke 2001-10-25 17:21:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders ccs@m... 2001-10-25 17:31:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Doug Harrison 2001-10-25 17:40:23 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Bill Griffin 2001-10-25 18:58:13 UTC Re: Newall sperosyn encoders Sven Peter 2001-10-25 20:00:41 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Doug Fortune 2001-10-25 21:11:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-25 22:52:55 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Jon Elson 2001-10-25 22:57:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-25 23:05:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-25 23:11:07 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Les Newell 2001-10-25 23:54:35 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Peter Seddon 2001-10-26 02:18:52 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Jon Anderson 2001-10-26 09:02:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-26 09:40:37 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders