CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders

Posted by Doug Harrison
on 2001-10-25 17:40:23 UTC
> In a similar fashion, a long flat steel bar stock could have an edge cut
> with a sinusoidal pattern. This could be "read" by a Hall-effect
> sensor? Seems one has to induce a magnetic field in the "sine rack" (or
> balls) in order to "read" them.
>
> Alan KM6VV

Perhaps the Newall encoders use the balls as a variable core for coupling
two coils as is done in an LVDT. It might be possible to cannibalize an
LVDT to get the read head.

Doug

Discussion Thread

Les Newell 2001-10-25 14:13:09 UTC Newall sperosyn encoders Alan Marconett KM6VV 2001-10-25 14:30:23 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Bill Griffin 2001-10-25 16:20:17 UTC Re: Newall sperosyn encoders Smoke 2001-10-25 17:21:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders ccs@m... 2001-10-25 17:31:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Doug Harrison 2001-10-25 17:40:23 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Bill Griffin 2001-10-25 18:58:13 UTC Re: Newall sperosyn encoders Sven Peter 2001-10-25 20:00:41 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Doug Fortune 2001-10-25 21:11:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-25 22:52:55 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Jon Elson 2001-10-25 22:57:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-25 23:05:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-25 23:11:07 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Les Newell 2001-10-25 23:54:35 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Peter Seddon 2001-10-26 02:18:52 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders Jon Anderson 2001-10-26 09:02:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders Jon Elson 2001-10-26 09:40:37 UTC Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders