Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
Posted by
Jon Elson
on 2001-10-25 22:57:05 UTC
Bill Griffin wrote:
pretty expensive, and the heads are REALLY expensive.
Encoding the tape ACCURATELY might not be so easy as it sounds.
Jon
> I have the Newall systems on my compact 8 lathe and knee mill, theyHeidenhain has a system that works like this. But, the scales are
> are great! I had posed this question ages ago here on the list. As I
> recall, someone mentioned a chip that would make reading the scales
> (tubes filled with precision ground balls) easier.
>
> I also suggested using a MR head to read a magnetically encoded
> scale in a similar fashion to a credit card encoding. Encoding
> magnetic tape with the bits would be fairly easy if someone could
> work out the readheads.
pretty expensive, and the heads are REALLY expensive.
Encoding the tape ACCURATELY might not be so easy as it sounds.
Jon
Discussion Thread
Les Newell
2001-10-25 14:13:09 UTC
Newall sperosyn encoders
Alan Marconett KM6VV
2001-10-25 14:30:23 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Bill Griffin
2001-10-25 16:20:17 UTC
Re: Newall sperosyn encoders
Smoke
2001-10-25 17:21:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
ccs@m...
2001-10-25 17:31:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
Doug Harrison
2001-10-25 17:40:23 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Bill Griffin
2001-10-25 18:58:13 UTC
Re: Newall sperosyn encoders
Sven Peter
2001-10-25 20:00:41 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Doug Fortune
2001-10-25 21:11:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
Jon Elson
2001-10-25 22:52:55 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Jon Elson
2001-10-25 22:57:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
Jon Elson
2001-10-25 23:05:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
Jon Elson
2001-10-25 23:11:07 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Les Newell
2001-10-25 23:54:35 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Peter Seddon
2001-10-26 02:18:52 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders
Jon Anderson
2001-10-26 09:02:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Newall sperosyn encoders
Jon Elson
2001-10-26 09:40:37 UTC
Re: [CAD_CAM_EDM_DRO] Newall sperosyn encoders