CAD CAM EDM DRO - Yahoo Group Archive

Re: Power Supply Question

Posted by ccs@m...
on 2001-10-31 14:39:07 UTC
--- In CAD_CAM_EDM_DRO@y..., JanRwl@A... wrote:
> For that kind of "non-electronic" application, the rectified output
of a
> Variac (S.E.'s name for "variable transformer") would do. Oh, if
you need
> more voltage, you could feed the output of the Variac into the
primary of a
> 2:3 transformer, even an auto-transformer, and rectify the output
of that.
>

Variacs are extremely usefull devices, however you should check
to see if yours provided isolation from the A/C line. I think
I heard that most do not. Autotransformers do not provide isolation
either. So it would be safer to use an isolation transformer
with the variac.

Chris

Discussion Thread

Dan Statman 2001-10-31 14:04:10 UTC Power Supply Question JanRwl@A... 2001-10-31 14:32:42 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question ccs@m... 2001-10-31 14:39:07 UTC Re: Power Supply Question jesse 2001-10-31 14:55:59 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question JanRwl@A... 2001-10-31 15:02:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Question Dan Statman 2001-10-31 15:09:32 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question mariss92705@y... 2001-10-31 16:57:57 UTC Re: Power Supply Question Dan Statman 2001-10-31 17:11:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Question brian 2001-10-31 17:52:49 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question JanRwl@A... 2001-10-31 18:30:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Question Carol & Jerry Jankura 2001-10-31 18:37:05 UTC RE: [CAD_CAM_EDM_DRO] Power Supply Question jesse 2001-10-31 19:16:29 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question Steve Smith 2001-10-31 20:10:46 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question Jon Elson 2001-10-31 23:35:29 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question washcomp <jeff@w... 2003-02-16 12:30:01 UTC Power Supply Question