CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Power Supply Question

Posted by Dan Statman
on 2001-10-31 15:09:32 UTC
Yes, I know of the reactive metals one, but it is $400 for not much IMHO. I
was trying to just build a quick system to see if I needed to incorporate
this anodizing into my product line. I do not think there is a need to
regulate the current, but I haven't done any anodizing yet.

Thanks for the input.

Daniel J. Statman, Statman Designs
www.statmandesigns.com


----- Original Message -----
From: "jesse" <jkbrennan@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, October 31, 2001 5:55 PM
Subject: Re: [CAD_CAM_EDM_DRO] Power Supply Question


> I know you know this but see:
>
> http://www.reactivemetals.com/
>
> Their standard unit will be pretty simple I think it is a 225 watt variac
, a
> switch, a fuse ,\a full wave bridge and a recipticle out in a box. It may
have
> a capacitor for filtering and probably does. Components are
inexpensive. The
> Variac is about $75 at list . I bought a few of these industrial surplus
new
> for &20 each a while back but they are gone.
> Bill Sealy had plans for thes at one time but I think he will only sell
the
> units now. He does have a current control as an extra but I haven't been
able
> to find out what it actually is. The add on is cheap so it can't be much.
As I
> say I wasan't able to find a regulator IC that will work on 3 amps at 200
volts
> DC.
> I built my own box but still have no current regulation other than the
load.
> Jesse
> JanRwl@... wrote:
>
> > For that kind of "non-electronic" application, the rectified output of a
> > Variac (S.E.'s name for "variable transformer") would do. Oh, if you
need
> > more voltage, you could feed the output of the Variac into the primary
of a
> > 2:3 transformer, even an auto-transformer, and rectify the output of
that.
> >
> > For less than, say, 40 VDC, "precision" voltage-regulation is routine,
using
> > such as the 78HGA adjustable, 4-pin TO-3 regulator (Fairchild
Semiconductor).
> >
> >
> > But a relatively-precision (i.e., "electronic") 3-amp DC
adjustable/regulated
> > supply, up to 200 VDC? We're talking some serious change!
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Dan Statman 2001-10-31 14:04:10 UTC Power Supply Question JanRwl@A... 2001-10-31 14:32:42 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question ccs@m... 2001-10-31 14:39:07 UTC Re: Power Supply Question jesse 2001-10-31 14:55:59 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question JanRwl@A... 2001-10-31 15:02:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Question Dan Statman 2001-10-31 15:09:32 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question mariss92705@y... 2001-10-31 16:57:57 UTC Re: Power Supply Question Dan Statman 2001-10-31 17:11:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Question brian 2001-10-31 17:52:49 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question JanRwl@A... 2001-10-31 18:30:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Question Carol & Jerry Jankura 2001-10-31 18:37:05 UTC RE: [CAD_CAM_EDM_DRO] Power Supply Question jesse 2001-10-31 19:16:29 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question Steve Smith 2001-10-31 20:10:46 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question Jon Elson 2001-10-31 23:35:29 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Question washcomp <jeff@w... 2003-02-16 12:30:01 UTC Power Supply Question