Re: [CAD_CAM_EDM_DRO] Re: DIY probing

>
> > Seems to me your project would be much simple, quicker and cheaper to
> > accomplish using RTV rubber to cast a mold of the inside if the horns'

>
> Unfortunately folks aren't going to let me smear mold release on their
> 200+ year old antiques made of brittle deiznicified brass and then
> fill them with a material that releases acetic acid when it cures...
> If I were going to do a casting I'd use something in the way of a
> plaster.
>
> The default method is to cut a wooden template that fits the inside and
> then push modeling clay around the edges to get the countour more exactly,
> then trace this.
>
> Chris
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>