Re: Drill file from Eagle PCB
Posted by
wayne_j_hill@y...
on 2001-11-17 14:19:04 UTC
Zach,
Try this converter from Hans Wedemeyer's web site.
http://hans-w.com/download.htm
http://home.swbell.net/hans_w/EtoG.zip
Wayne
Try this converter from Hans Wedemeyer's web site.
http://hans-w.com/download.htm
http://home.swbell.net/hans_w/EtoG.zip
Wayne
--- In CAD_CAM_EDM_DRO@y..., zsradding@b... wrote:
> I am having a difficult time generating a g-code file that I can use
> to drill a PCB I created in Eagle 4.05. I have tried every output
> device option, but I can't get a file that is scaled correctly and
has
> the correct g-code information. Any advice?
>
> I used the outlines-gcode.ulp and it worked great for the isolation.
> Now, I just need a drill file...
>
> Thanks in advance,
>
> Zach
> http://www.buildcoolstuff.com
Discussion Thread
zsradding@b...
2001-11-14 01:30:57 UTC
Drill file from Eagle PCB
cncdxf@a...
2001-11-14 03:03:23 UTC
Re: Drill file from Eagle PCB
Jon Elson
2001-11-14 10:53:13 UTC
Re: [CAD_CAM_EDM_DRO] Drill file from Eagle PCB
wayne_j_hill@y...
2001-11-17 14:19:04 UTC
Re: Drill file from Eagle PCB