Re: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe
Posted by
ccs@m...
on 2001-11-17 18:28:14 UTC
> Instead of taking the spindle out, replace the belts with link-type v-Link belts do not work in reversing applications as they have to be
> belts. These belts are made up of links which snap together to
> create any length belt. Link-type belts are better than conventional
> belts.
installed with the overlapping part of the links oriented in the
direction of rotation. See the installation instructions at
http://www.fennerindustrial.com/products/pdfs/ptpinstall_new.pdf
Chris
Discussion Thread
Gary Mazzaferro
2001-11-17 13:46:36 UTC
Help w/ Sheldon Lathe
dougrasmussen@c...
2001-11-17 18:08:21 UTC
Re: Help w/ Sheldon Lathe
ccs@m...
2001-11-17 18:28:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe
JanRwl@A...
2001-11-17 19:17:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe
dougrasmussen@c...
2001-11-17 20:19:16 UTC
Re: Help w/ Sheldon Lathe
ccs@m...
2001-11-17 20:54:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe
Smoke
2001-11-17 21:12:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe
Mike Chaney
2001-11-18 01:28:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe
Gary Mazzaferro
2001-11-19 22:22:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: Help w/ Sheldon Lathe