RE: [CAD_CAM_EDM_DRO] My Plasma Table

Alan,
I believe they're right around 85 oz/in... the rack and pinion
surprisingly works great! A few minor bugs at first, but its working
great now - still doing test pieces on the whole thing, but the test
pieces are coming out very square and accurate.
I'm hoping that with Dolphin's suite I'll have some better luck
with NC code - KCAM is really cool, but it lacks efficiency.
-Chris

-----Original Message-----
From: Alan Marconett KM6VV [mailto:KM6VV@...]
Sent: Tuesday, December 11, 2001 12:39 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] My Plasma Table

Hi Chris,

Nice work! How's the rack and pinion working? And I'm surprised you
can move everything with the Vextra's. What are they, about 85 oz/in?

Alan KM6VV


Chris Clough wrote:

>
> Ok group,
> I took the initiative and whipped up a page in about 5 minutes
> and took some picts of my table. No flaming please :)
>
> http://www.xtecheng.com/cnc/
>
> I'm interested in any advice or comments - it's far from
> completed as I'm still designing the plasma height control.
> Also - software wise I think I'm going go ahead and go with
> Dolphin's Suite - Michael is really helpful... we'll see how that

goes.

> Let me know what you'll think,
> -Chris Clough
> Xtech Engineering

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/