Re: Weird Nut 1/2" 12 TPI left-handed thread
Posted by
doug98105
on 2001-12-20 12:46:09 UTC
Lee,
Other than going direct to the grinder manufacturer, that'll be a
hard one to find. 1/2-12 is probably British standard.
A while back I was looking for some 1/2-12 socket head cap screws
with normal right hand thread, those were hard to find. Left hand
fasteners will be worse.
Maybe some of our UK friends can help you.
Doug
Other than going direct to the grinder manufacturer, that'll be a
hard one to find. 1/2-12 is probably British standard.
A while back I was looking for some 1/2-12 socket head cap screws
with normal right hand thread, those were hard to find. Left hand
fasteners will be worse.
Maybe some of our UK friends can help you.
Doug
--- In CAD_CAM_EDM_DRO@y..., "studleylee" <indigo_red@q...> wrote:
> Hi,
> Does anyone know where I can find a replacement nut:-)
> 1/2" diameter
> 12 Threads Per Inch
> left-handed thread
>
> Its for a friends bench grinder, and the local sources dont seem
> to have one.
>
> Thanks,
> Lee
Discussion Thread
studleylee
2001-12-20 12:25:45 UTC
Weird Nut 1/2" 12 TPI left-handed thread
doug98105
2001-12-20 12:46:09 UTC
Re: Weird Nut 1/2" 12 TPI left-handed thread
studleylee
2001-12-20 12:52:58 UTC
Re: Weird Nut 1/2" 12 TPI left-handed thread
awemawson
2001-12-20 13:34:27 UTC
Re: Weird Nut 1/2" 12 TPI left-handed thread
Ted Walls
2001-12-20 13:59:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread
Smoke
2001-12-20 15:35:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread
Marcus & Eva
2001-12-20 19:08:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread
Brian Pitt
2001-12-20 19:10:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread
studleylee
2001-12-20 21:36:48 UTC
Re: Weird Nut 1/2" 12 TPI left-handed thread
ppump11578@a...
2001-12-21 04:00:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread