CAD CAM EDM DRO - Yahoo Group Archive

Re: Weird Nut 1/2" 12 TPI left-handed thread

Posted by studleylee
on 2001-12-20 12:52:58 UTC
Thanks Doug,

hmmm... I might try to fabricate one on the lathe, but it would be
nice if I could get one premade.
-Lee

--- In CAD_CAM_EDM_DRO@y..., "doug98105" <dougrasmussen@c...> wrote:
> Lee,
>
> Other than going direct to the grinder manufacturer, that'll be a
> hard one to find. 1/2-12 is probably British standard.
>
> A while back I was looking for some 1/2-12 socket head cap screws
> with normal right hand thread, those were hard to find. Left hand
> fasteners will be worse.
>
> Maybe some of our UK friends can help you.
>
> Doug
>
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "studleylee" <indigo_red@q...> wrote:
> > Hi,
> > Does anyone know where I can find a replacement nut:-)
> > 1/2" diameter
> > 12 Threads Per Inch
> > left-handed thread
> >
> > Its for a friends bench grinder, and the local sources dont seem
> > to have one.
> >
> > Thanks,
> > Lee

Discussion Thread

studleylee 2001-12-20 12:25:45 UTC Weird Nut 1/2" 12 TPI left-handed thread doug98105 2001-12-20 12:46:09 UTC Re: Weird Nut 1/2" 12 TPI left-handed thread studleylee 2001-12-20 12:52:58 UTC Re: Weird Nut 1/2" 12 TPI left-handed thread awemawson 2001-12-20 13:34:27 UTC Re: Weird Nut 1/2" 12 TPI left-handed thread Ted Walls 2001-12-20 13:59:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread Smoke 2001-12-20 15:35:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread Marcus & Eva 2001-12-20 19:08:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread Brian Pitt 2001-12-20 19:10:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread studleylee 2001-12-20 21:36:48 UTC Re: Weird Nut 1/2" 12 TPI left-handed thread ppump11578@a... 2001-12-21 04:00:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Weird Nut 1/2" 12 TPI left-handed thread