Re: Buying or CNCing some odd angle bevel gears. I'm stuck !!

Hi Fiddlerphil

It's 1/4 scale, which would make the crankcase about 12 inches long.
Add another 2 inches for the nose cone (minus the prop shaft), plus 3
inches for the wheelcase, then about 3 or 4 more inches for the
supercharger section and carburetor inlet elbow, so when she's done,
it should be about 21 inches long, give or take. I'd have to measure
all the original parts I have in my basement to give you a more
accurate guess at the 1/4 scale model.

So, know where I can get odd angle bevel gears?

Cheers, Tom Kay.

--- In CAD_CAM_EDM_DRO@y..., ppump11578@a... wrote:
> How large is your Merlin please?
> regards
> Fiddlerphil