Re: [CAD_CAM_EDM_DRO] Re: Z axis
Posted by
Jon Elson
on 2002-01-11 11:04:59 UTC
Hugh Currin wrote:
is a bit more current.
do that this weekend, but meanwhile, here are some pictures.
The lower part of the leadscrew bracket and attachment to main housing :
http://jelinux.pico-systems.com/images/zbot.jpg
A poor picture of the motor mounting, etc :
http://jelinux.pico-systems.com/images/zdrive.jpg
A view of the whole assembly mounted to the head :
http://jelinux.pico-systems.com/images/zfront.jpg
A picture of the upper part of the ballscrew mount, showing the bracket
that holds it to the head, the upper bearing support (simple), the encoder
mount, and the coupling between the ballnut and the quill.
http://jelinux.pico-systems.com/images/ztop.jpg
Jon
> Matthew:The above still works, but http://pico-systems.com/CNCconv.html
>
> On Thursday 10 January 2002 09:33 pm, you wrote:
> >
> > Please point me in the direction of a set of plans to
> > retrofit the z axis of my bridgeport for cnc operations.
> >
> I don't know of any available plans. There is one retrofit kit for the z-axis
> from Microkinetics (www.microkinetics.com/convkit.htm) for some $1200 without
> stepper motor. I know of two home built systems which use the quill. One is
> Jon Elson's (www.artsci.wustl.edu/~jmelson/CNCconv.html)
is a bit more current.
> who is active onI didn't realize that the Z axis stuff wasn't linked to the main page. I will
> this list. He had a page up with more pictures but I can't find it right off.
do that this weekend, but meanwhile, here are some pictures.
The lower part of the leadscrew bracket and attachment to main housing :
http://jelinux.pico-systems.com/images/zbot.jpg
A poor picture of the motor mounting, etc :
http://jelinux.pico-systems.com/images/zdrive.jpg
A view of the whole assembly mounted to the head :
http://jelinux.pico-systems.com/images/zfront.jpg
A picture of the upper part of the ballscrew mount, showing the bracket
that holds it to the head, the upper bearing support (simple), the encoder
mount, and the coupling between the ballnut and the quill.
http://jelinux.pico-systems.com/images/ztop.jpg
Jon
Discussion Thread
mjf462001
2002-01-10 21:33:13 UTC
Z axis
Dr.D
2002-01-10 22:32:47 UTC
Re: [CAD_CAM_EDM_DRO] Z axis
mjf462001
2002-01-10 22:52:39 UTC
Re: Z axis
Keith Rumley
2002-01-11 06:50:58 UTC
Re: [CAD_CAM_EDM_DRO] Z axis
Hugh Currin
2002-01-11 09:51:31 UTC
Re: Z axis
mjf462001
2002-01-11 10:12:19 UTC
Re: Z axis Thanks
ccs@m...
2002-01-11 10:23:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis Thanks
Jon Elson
2002-01-11 11:04:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Dan Mauch
2002-01-11 11:06:36 UTC
RE: [CAD_CAM_EDM_DRO] Re: Z axis Thanks
Jon Elson
2002-01-11 11:10:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis Thanks
mjf462001
2002-01-11 20:48:41 UTC
Re: Z axis Dan
Hugh Currin
2002-01-12 07:34:25 UTC
Re: Z axis
Hugh Currin
2002-01-12 08:01:29 UTC
Mill-Drill Conversion
mjf462001
2002-01-12 08:05:33 UTC
Re: Z axis
Dan Mauch
2002-01-12 10:54:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: Z axis Dan
jeffswayze
2002-01-12 12:54:25 UTC
Re: Mill-Drill Conversion
Jon Elson
2002-01-12 17:28:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
mjf462001
2002-01-12 20:21:18 UTC
Re: Z axis
Jon Elson
2002-01-12 21:51:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Dan Mauch
2002-01-13 10:34:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: Z axis
Peter
2002-01-13 19:19:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Smoke
2002-01-13 19:29:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Peter
2002-01-13 21:50:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
stevenson_engineers
2002-01-14 01:08:31 UTC
Re: Z axis
mjf462001
2002-01-14 02:25:54 UTC
Re: Z axis
Keith Rumley
2002-01-14 07:18:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Smoke
2002-01-14 09:27:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Peter
2002-01-14 13:01:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Russell Shaw
2002-01-14 15:51:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
Smoke
2002-01-14 20:39:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis
mjf462001
2002-01-14 21:28:41 UTC
Re: Z axis Peter