Re: [CAD_CAM_EDM_DRO] BobCAD users
Posted by
James Stevens
on 2002-01-25 07:13:00 UTC
Alex,
I ran in to a similar problem last night. This time it wasn't a pocket
function, just an "auto cut" that went out of control and repeated some 20
times (the previous 3 cuts worked fine).
No explanation or fix that I know of other than manually deleting extra
code - a real pain.
I think I need some $$$ to upgrade to Vector.
James
I ran in to a similar problem last night. This time it wasn't a pocket
function, just an "auto cut" that went out of control and repeated some 20
times (the previous 3 cuts worked fine).
No explanation or fix that I know of other than manually deleting extra
code - a real pain.
I think I need some $$$ to upgrade to Vector.
James
----- Original Message -----
From: "Alex Canale" <alex.canale@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 25, 2002 8:10 AM
Subject: RE: [CAD_CAM_EDM_DRO] BobCAD users
> It actually does 15 to 20 more passes of only the last pass. The part does
> finish to the expected I.D. but it takes an extra 15 minutes per pocket
> multiply that by 9 = lots of wasted time. It does not remove any material
it
> just goes right over it's last pass. The only way I know of canceling a
> routine like that is to actually bring the tool up to clearence for the
next
> pocket. I actually fixed it "manually" I edited the g-code by removing all
> the extra lines in the code. I just don't want to have to do this
everytime
> I mill a pocket.
>
> Thanks,
> Alex
>
> -----Original Message-----
> From: Raymond Heckert [mailto:jnr@...]
> Sent: Friday, January 25, 2002 12:40 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] BobCAD users
>
>
> Perhaps you are seeing the "clean-up" pass that most pocketing routines
> generate. Does it do one more pass around the square, or more than one?
> Does the part "finish" to the expected I.D.'s? Try "painting" the roughed
> pocket with blueing dye, and check to see if it's the last thing removed.
> Maybe you didn't cancel the pocketing code properly.
>
> Ray Heckert
>
> ----------
> > From: Alex Canale <alex.canale@...>
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: RE: [CAD_CAM_EDM_DRO] BobCAD users
> > Date: Thursday, January 24, 2002 11:21 AM
> >
> > For those who use BobCAD do you know why and how to fix this problem?
> >
> > I am cutting a square pocket in copper. This pocket is .18 deep and .375
> > wide. I already got the pocket milled out but I wanted to go back with
an
> > 1/16" end mill and clean the bottom of the pocket. So I made the end
mill
> go
> > all the way down plus .002". It overlaps it previous path by .010" and
it
> > describes a spiral path starting from the center and going outwards. The
> > problem is that when it gets to the last spiral path it keeps going and
> > going and going kinda like the energizer bunny. When I look at the code
I
> > can see all the extra lines that are generating all the extra
unnecessary
> > passes.
> >
> > What can I do to fix this problem in NCcam. Is there a variable that I
> need
> > to change?
> >
> > Thanks,
> > Alex
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
Russell Shaw
2002-01-23 22:41:57 UTC
Maximum stepper speed
mariss92705
2002-01-24 08:26:00 UTC
Re: Maximum stepper speed
Jon Elson
2002-01-24 10:50:58 UTC
Re: [CAD_CAM_EDM_DRO] Maximum stepper speed
Alex Canale
2002-01-24 11:09:29 UTC
RE: [CAD_CAM_EDM_DRO] BobCAD users
Russell Shaw
2002-01-24 16:12:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Maximum stepper speed
Keith Rumley
2002-01-24 16:57:41 UTC
Re: [CAD_CAM_EDM_DRO] BobCAD users
mariss92705
2002-01-24 19:31:52 UTC
Re: Maximum stepper speed
Raymond Heckert
2002-01-24 19:56:21 UTC
Re: [CAD_CAM_EDM_DRO] BobCAD users
ballendo
2002-01-25 03:20:16 UTC
Re: BobCAD users
Alex Canale
2002-01-25 05:21:15 UTC
RE: [CAD_CAM_EDM_DRO] Re: BobCAD users
Alex Canale
2002-01-25 05:57:45 UTC
RE: [CAD_CAM_EDM_DRO] BobCAD users
James Stevens
2002-01-25 07:13:00 UTC
Re: [CAD_CAM_EDM_DRO] BobCAD users
stevenson_engineers
2002-01-25 13:45:54 UTC
Re: BobCAD users
Alex Canale
2002-01-25 16:10:43 UTC
RE: [CAD_CAM_EDM_DRO] Re: BobCAD users