A Blue box, and Alan's Blackbox

Hi Alan,

Then I have "Alan's (KM6VV) Blue Box". Four (4) G210 Gecko's, DB15
connectors. Two DIN connectors for limit and E- switches, and a
digitizer probe. Solid State switch for spindle control. Drives three
Sanyo Denki 180's, and an old SlowSyn 85 oz/in stepper for the Sherline
CNC ready rotary table.

Built into a salvaged 19" wide rack mount case. Pix to follow.

Alan KM6VV
(on the other coast)


rcstickman wrote:

>
> Hi Group,
>
> I have posted a couple of photo's of the Controller Box I am building.
> A "True Black Box", hehe!!Aluminum housing for a Nuclear Med. Camera
> I salvaged a few years ago. Gecko 201's, DB15's on top will allow me
> to use the same controller for both my Taig mill and Dahlgren
> Engraver. Motors are New Sanyo Dekni 180's on both so I just unplug
> one and plug in the other.
>
> Alan Trest
> Pensacola Florida