CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] indexing layout for larger capacity

Posted by Chris L
on 2002-02-17 17:59:56 UTC
Dale,
The concept of "indexing" as they are using it simply means to find a way to
"slide" the material thru the machine to a new point and continue cutting.
For example, you could only do this in the direction where you could slide 8'
under the gantry on a 4'x4' machine.

In order to do this you do not need anything special other than a little
ingenuity. You need to have a know location on the machine, a know distance
you will slide the material and also it is then beneficial to place some type
of "mark" or "registration" point in your drawing.

You just cut one half, slide the material the known distance, and cut the
other half of the job.

CL

aspaguy wrote:

> HI list,
> I tried to search the archives for this answer, but the term index
> has multiple meanings in this field.
> Plasmacam manufactures a 4'x4' plasma table, but claims to have 4'x
> unlimited capacity because you can "index" the material and move it
> down and resume cutting. Is this a cad or cam function, and, do I
> need a specific programm for this or is it a feature most cad/cam
> programs utilize?
> Thanks, Dale
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

aspaguy 2002-02-17 17:50:39 UTC indexing layout for larger capacity Chris L 2002-02-17 17:59:56 UTC Re: [CAD_CAM_EDM_DRO] indexing layout for larger capacity aspaguy 2002-02-17 18:13:02 UTC Re: indexing layout for larger capacity Bob Campbell 2002-02-17 18:15:39 UTC Re: [CAD_CAM_EDM_DRO] indexing layout for larger capacity Chris L 2002-02-17 20:39:30 UTC Re: [CAD_CAM_EDM_DRO] indexing layout for larger capacity Raymond Heckert 2002-02-17 21:46:27 UTC Re: [CAD_CAM_EDM_DRO] indexing layout for larger capacity ballendo 2002-02-18 02:01:23 UTC Paneling output was Re: indexing layout for larger capacity imserv1 2002-02-18 07:28:57 UTC Paneling output was Re: indexing layout for larger capacity