Re: [CAD_CAM_EDM_DRO] Re: plasma cutting table

A router cnc system would cut it with no problem, make sure the aluminum is
at least a 50/52 grade or better.........

----- Original Message -----
From: dave_ace_me <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, March 29, 2002 7:23 PM
Subject: [CAD_CAM_EDM_DRO] Re: plasma cutting table


> > I myself only cut steel.
> > I saw aluminum or run
> > it on my router.
>
> Here is a fork in the road question.
>
> if you were only handling 1/8 inch aluminum and had arcs and curves
> in parts that were close to 12 inch x 12 inch, which way would you
> go ?
>
> Plasma ? or router ?
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>