CAD CAM EDM DRO - Yahoo Group Archive

Re: tape-O-matic

Posted by Ted Robbins
on 1999-12-21 09:06:00 UTC
If you don't turn on the spindle motor- it has its own contactor- you can
even pull a wire off the contactor coil- you can jog the motors from the
control panel. If they go the right way the machine is phased properly.

The table should move away from the column to move plus in the Y axis, It
should move to the operator's left to move plus in the X axis.

Ted

Discussion Thread

Brad Heuver 1999-12-21 05:37:19 UTC tape-O-matic Jeff Barlow 1999-12-21 08:12:29 UTC RE: tape-O-matic Ted Robbins 1999-12-21 09:06:00 UTC Re: tape-O-matic Jon Elson 1999-12-21 12:54:19 UTC Re: tape-O-matic Ted Robbins 1999-12-21 17:34:48 UTC Re: tape-O-matic Jon Elson 1999-12-22 12:15:51 UTC Re: tape-O-matic Ted Robbins 1999-12-22 17:32:22 UTC Re: tape-O-matic Brad Heuver 1999-12-23 07:23:18 UTC tape-O-matic Jon Elson 1999-12-23 11:48:27 UTC Re: tape-O-matic Paul Devey 1999-12-23 14:46:03 UTC RE: tape-O-matic