.9 deg/step motor
Posted by
jeffdavis516
on 2002-04-18 22:46:03 UTC
Does anyone know why a Vextra 8 wire .9 deg per step stepper motor
would not work correctly with a bipolar driver? I have tried this
motor with Dan Mauch's 2 Amp driver and it only goes back and forth
when I jog the axis. I know that the driver works because I tried a
normal 1.8 deg per step motor and that stepper works fine.
Thanks
Jeff Davis
http://www.homecnc.info
would not work correctly with a bipolar driver? I have tried this
motor with Dan Mauch's 2 Amp driver and it only goes back and forth
when I jog the axis. I know that the driver works because I tried a
normal 1.8 deg per step motor and that stepper works fine.
Thanks
Jeff Davis
http://www.homecnc.info
Discussion Thread
jeffdavis516
2002-04-18 22:46:03 UTC
.9 deg/step motor
RichD
2002-04-18 23:14:47 UTC
Re: [CAD_CAM_EDM_DRO] .9 deg/step motor
Carol & Jerry Jankura
2002-04-19 05:56:24 UTC
RE: [CAD_CAM_EDM_DRO] .9 deg/step motor
Alan Marconett KM6VV
2002-04-19 11:06:29 UTC
Re: [CAD_CAM_EDM_DRO] .9 deg/step motor
jeffdavis516
2002-04-19 11:10:57 UTC
Re: .9 deg/step motor
Jon Elson
2002-04-19 13:57:56 UTC
Re: [CAD_CAM_EDM_DRO] .9 deg/step motor
RichD
2002-04-19 14:07:43 UTC
Re: [CAD_CAM_EDM_DRO].9 deg/step motor
Brian
2002-04-19 17:01:02 UTC
Re: [CAD_CAM_EDM_DRO] .9 deg/step motor
jeffdavis516
2002-04-22 23:15:51 UTC
Re: .9 deg/step motor
tonyjeffree
2002-04-22 23:49:32 UTC
Re: .9 deg/step motor
Jon Elson
2002-04-23 10:10:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: .9 deg/step motor