CAD CAM EDM DRO - Yahoo Group Archive

Re: .9 deg/step motor

Posted by jeffdavis516
on 2002-04-19 11:10:57 UTC
If I can believe the sketch that came with the motors then I have it
wired correctly. I will compare your color chart for the PK series
when I get home tonight. It could be that the chart is wrong.

Thanks

Jeff Davis
http://www.homecnc.info

--- In CAD_CAM_EDM_DRO@y..., RichD <cmsteam@s...> wrote:
> Jeff,
> I'm sure you don't have it connected correctly.
> Anytime it just rattles back & forth or runs either way regardless.
> The diagram I have shows:
> For PH series-
> A+black
> A-yellow
> a+orange
> a-green
> B+red
> B-white
> b+brown
> b-blue
>
> For PK series-
> A+black
> A-black/white
> a+orange/white
> a-orange
> B+red
> B-red/white
> b+yellow/white
> b-yellow
>
> RichD
>
>
> jeffdavis516 wrote:
> >
> > Does anyone know why a Vextra 8 wire .9 deg per step stepper motor
> > would not work correctly with a bipolar driver? I have tried this
> > motor with Dan Mauch's 2 Amp driver and it only goes back and
forth
> > when I jog the axis. I know that the driver works because I
tried a
> > normal 1.8 deg per step motor and that stepper works fine.
> >
> > Thanks
> >
> > Jeff Davis
> > http://www.homecnc.info
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
as a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> --
> ~ ~~ ~ ~ ~~ ~~____~,~~ ~~~~
> \------/ |00|_[]_[]__||0
> .|_CMRy_|-|__|________|_|,
> __________''oo__oo__---"0=0=0"=o[]o\\___________________________
> -=Rich=-=Colorado Midland Railway=-=cmsteam@s...=-
> -------See my web site: <http://cmsteamer.homestead.com/> ------

Discussion Thread

jeffdavis516 2002-04-18 22:46:03 UTC .9 deg/step motor RichD 2002-04-18 23:14:47 UTC Re: [CAD_CAM_EDM_DRO] .9 deg/step motor Carol & Jerry Jankura 2002-04-19 05:56:24 UTC RE: [CAD_CAM_EDM_DRO] .9 deg/step motor Alan Marconett KM6VV 2002-04-19 11:06:29 UTC Re: [CAD_CAM_EDM_DRO] .9 deg/step motor jeffdavis516 2002-04-19 11:10:57 UTC Re: .9 deg/step motor Jon Elson 2002-04-19 13:57:56 UTC Re: [CAD_CAM_EDM_DRO] .9 deg/step motor RichD 2002-04-19 14:07:43 UTC Re: [CAD_CAM_EDM_DRO].9 deg/step motor Brian 2002-04-19 17:01:02 UTC Re: [CAD_CAM_EDM_DRO] .9 deg/step motor jeffdavis516 2002-04-22 23:15:51 UTC Re: .9 deg/step motor tonyjeffree 2002-04-22 23:49:32 UTC Re: .9 deg/step motor Jon Elson 2002-04-23 10:10:03 UTC Re: [CAD_CAM_EDM_DRO] Re: .9 deg/step motor