CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] G-Code

on 2002-05-26 10:38:36 UTC
Gene,

I don't use it but have in the past. Just downloaded a copy and
did the following.

Entered the text in the box

Set the width and height of the letters

clicked "Create" and "Set Parameters" and entered the
revelant parameters

select the font (under the create menu)

click the button on the left with the "F" on it. The text with the
toolpath should show up in the lower window

click "file" and "save as "gcode"

If this is what you did, maybe you got a damaged copy, try downloading
a new version and reloading.

Here are the first 10 lines of the created file for the letter "A" As you
can see there is no G20 in there so EMC will cut in whatever mode it happens
to be in.

G90 T0 F100.0
N1 G00 Z0.250
N11 G00 X0.357 Y0.361
N31 G01 Z-0.500 F25.0
N41 F100.0
N51 X0.362 Y0.377
N61 X0.367 Y0.395
N71 X0.372 Y0.411
N81 X0.377 Y0.430

Bill

Discussion Thread

Art Fenerty 2000-09-02 10:24:29 UTC G-Code Gene 2002-05-26 09:43:03 UTC G-Code William Scalione 2002-05-26 10:12:20 UTC Re: [CAD_CAM_EDM_DRO] G-Code Gene 2002-05-26 10:25:25 UTC Re: [CAD_CAM_EDM_DRO] G-Code William Scalione 2002-05-26 10:38:36 UTC Re: [CAD_CAM_EDM_DRO] G-Code Gene 2002-05-26 11:04:29 UTC Re: [CAD_CAM_EDM_DRO] G-Code William Scalione 2002-05-26 11:17:36 UTC Re: [CAD_CAM_EDM_DRO] G-Code Gene 2002-05-26 13:47:06 UTC Re: [CAD_CAM_EDM_DRO] G-Code John Guenther 2002-05-26 14:33:21 UTC RE: [CAD_CAM_EDM_DRO] G-Code William Scalione 2002-05-26 14:48:06 UTC Re: [CAD_CAM_EDM_DRO] G-Code Randy Gordon-Gilmore 2002-05-26 15:27:50 UTC Re: [CAD_CAM_EDM_DRO] G-Code Alan Marconett KM6VV 2002-05-26 15:33:50 UTC Re: [CAD_CAM_EDM_DRO] G-Code Gene 2002-05-26 15:38:55 UTC Re: [CAD_CAM_EDM_DRO] G-Code Gene 2002-05-26 15:57:23 UTC Re: [CAD_CAM_EDM_DRO] G-Code William Scalione 2002-05-26 16:26:54 UTC Re: [CAD_CAM_EDM_DRO] G-Code Gene 2002-05-26 18:16:38 UTC Re: [CAD_CAM_EDM_DRO] G-Code Jon Elson 2002-05-26 23:08:45 UTC Re: [CAD_CAM_EDM_DRO] G-Code Carol & Jerry Jankura 2002-05-27 06:38:20 UTC RE: [CAD_CAM_EDM_DRO] G-Code