Re: [CAD_CAM_EDM_DRO] G-Code
Posted by
William Scalione
on 2002-05-26 16:26:54 UTC
Gene,
You have the decimal places set to 0 so it is rounding off to the nearest
whole number. 1.123 is rounded to 1.
Also are you running metric? if not with a rapid height of 25 you must
have a really large Z axis :) Try .25
Bill
you have trouble.
subjects, that are not allowed on the CCED list.
you have trouble.
subjects, that are not allowed on the CCED list.
You have the decimal places set to 0 so it is rounding off to the nearest
whole number. 1.123 is rounded to 1.
Also are you running metric? if not with a rapid height of 25 you must
have a really large Z axis :) Try .25
Bill
> The settings are lin. Origin X=0, origin y=0, width=0, height=1, angle=0to
> rad=0
> [Parameters]
> Depth=0.156
> RapidHeight=25
> RoughFeed=100
> RoughPlunge=100
> Precision=8
> Decimal=0
> Start=0
> Increment=1
>
> William Scalione wrote:
> >
> > Gene,
> >
> > Hang in there we'll get you through this,
> >
> > Go to your c:\program files\DeskEngrave directory, open the file
> > "Parameters.cfg" with wordpad and cut and paste the text to an email
> > I'll put those into my version and see what happens. also what are the
> > parameters for ALL of the items on the main page of desk engrave
> > orginX, orginY, alignment, height, width, angle, rad, linear/arc.
> >
> > Bill
> >
> > ----- Original Message -----
> > From: "Gene" <capper@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Sunday, May 26, 2002 4:46 PM
> > Subject: Re: [CAD_CAM_EDM_DRO] G-Code
> >
> > > Yes I got a new copy of desk engrave. This is what I get when I try
> > > save "Cap" in bookman old style, 72 points. Its the same if I saveY0
> > > directly from Desk Engrave or DFX- Ace converter.Ive tried 100 times
> > > with the same result.
> > > G90 TO F100.0
> > > N0 G00 Z25
> > > N1 G00 X-3 Y1
> > > N3 G01 Z0 F100.0
> > > N4 F100.0
> > > N5 X-3 Y1
> > > N6 X-3 Y1
> > > It goes on like this for 675 lines somtimes it goes to x-1 or X-2and
> > > But that is the only change.here
> > >
> > > William Scalione wrote:
> > > >
> > > > Well you got me stumped. I remember this program crashing on
> > > > me long ago when I used it, but it did always create the gcode.
> > > >
> > > > why not copy the first 20 lines or so of the output and upload it
> > > > maybe someone can figure it out.and
> > > >
> > > > did you try downloading a new copy?
> > > >
> > > > bill
> > > >
> > > > ----- Original Message -----
> > > > From: "Gene" <capper@...>
> > > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > > Sent: Sunday, May 26, 2002 2:03 PM
> > > > Subject: Re: [CAD_CAM_EDM_DRO] G-Code
> > > >
> > > > > Did everything you said and it worked and said it saved a dnc file
> > > > > when I try to read dnc file in notepad it is not g-code.the
> > > > >
> > > > > William Scalione wrote:
> > > > > >
> > > > > > Gene,
> > > > > >
> > > > > > I don't use it but have in the past. Just downloaded a copy and
> > > > > > did the following.
> > > > > >
> > > > > > Entered the text in the box
> > > > > >
> > > > > > Set the width and height of the letters
> > > > > >
> > > > > > clicked "Create" and "Set Parameters" and entered the
> > > > > > revelant parameters
> > > > > >
> > > > > > select the font (under the create menu)
> > > > > >
> > > > > > click the button on the left with the "F" on it. The text with
> > > > > > toolpath should show up in the lower window"A"
> > > > > >
> > > > > > click "file" and "save as "gcode"
> > > > > >
> > > > > > If this is what you did, maybe you got a damaged copy, try
> > downloading
> > > > > > a new version and reloading.
> > > > > >
> > > > > > Here are the first 10 lines of the created file for the letter
> > Asmode it
> > > > you
> > > > > > can see there is no G20 in there so EMC will cut in whatever
> > > > happensreach it
> > > > > > to be in.
> > > > > >
> > > > > > G90 T0 F100.0
> > > > > > N1 G00 Z0.250
> > > > > > N11 G00 X0.357 Y0.361
> > > > > > N31 G01 Z-0.500 F25.0
> > > > > > N41 F100.0
> > > > > > N51 X0.362 Y0.377
> > > > > > N61 X0.367 Y0.395
> > > > > > N71 X0.372 Y0.411
> > > > > > N81 X0.377 Y0.430
> > > > > >
> > > > > > Bill
> > > > > >
> > > > > > Addresses:
> > > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > > >
> > > > > > OFF Topic POSTS: General Machining
> > > > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > ifas a
> > > > you have trouble.
> > > > > > http://www.metalworking.com/news_servers.html
> > > > > >
> > > > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > > > sister site to the CCED group, as many of the same members arethere,
> > for OTreach it
> > > > subjects, that are not allowed on the CCED list.
> > > > > >
> > > > > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@...
> > > > > > Moderator: jmelson@... timg@...
> > [Moderator]
> > > > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > > > > bill,
> > > > > > List Mom
> > > > > > List Owner
> > > > > >
> > > > > >
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > > Addresses:
> > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > >
> > > > > OFF Topic POSTS: General Machining
> > > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > ifa
> > > > you have trouble.
> > > > > http://www.metalworking.com/news_servers.html
> > > > >
> > > > > http://groups.yahoo.com/group/jobshophomeshop I consider this as
> > > > sister site to the CCED group, as many of the same members arethere,
> > for OTwanliker@...
> > > > subjects, that are not allowed on the CCED list.
> > > > >
> > > > >
> > > > >
> > > > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > > > > Moderator: jmelson@... timg@...[Moderator]
> > > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DROif
> > > > > bill,
> > > > > List Mom
> > > > > List Owner
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > >
> > > > Addresses:
> > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > >
> > > > OFF Topic POSTS: General Machining
> > > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> > you have trouble.for OT
> > > > http://www.metalworking.com/news_servers.html
> > > >
> > > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same members are there,
> > subjects, that are not allowed on the CCED list.wanliker@...
> > > >
> > > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > > > Moderator: jmelson@... timg@...[Moderator]
> > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DROif
> > > > bill,
> > > > List Mom
> > > > List Owner
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> > you have trouble.for OT
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same members are there,
> > subjects, that are not allowed on the CCED list.http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > >aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> > >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
you have trouble.
> > http://www.metalworking.com/news_servers.htmlsister site to the CCED group, as many of the same members are there, for OT
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
subjects, that are not allowed on the CCED list.
> >http://docs.yahoo.com/info/terms/
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
you have trouble.
> http://www.metalworking.com/news_servers.htmlsister site to the CCED group, as many of the same members are there, for OT
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Art Fenerty
2000-09-02 10:24:29 UTC
G-Code
Gene
2002-05-26 09:43:03 UTC
G-Code
William Scalione
2002-05-26 10:12:20 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Gene
2002-05-26 10:25:25 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
William Scalione
2002-05-26 10:38:36 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Gene
2002-05-26 11:04:29 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
William Scalione
2002-05-26 11:17:36 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Gene
2002-05-26 13:47:06 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
John Guenther
2002-05-26 14:33:21 UTC
RE: [CAD_CAM_EDM_DRO] G-Code
William Scalione
2002-05-26 14:48:06 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Randy Gordon-Gilmore
2002-05-26 15:27:50 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Alan Marconett KM6VV
2002-05-26 15:33:50 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Gene
2002-05-26 15:38:55 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Gene
2002-05-26 15:57:23 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
William Scalione
2002-05-26 16:26:54 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Gene
2002-05-26 18:16:38 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Jon Elson
2002-05-26 23:08:45 UTC
Re: [CAD_CAM_EDM_DRO] G-Code
Carol & Jerry Jankura
2002-05-27 06:38:20 UTC
RE: [CAD_CAM_EDM_DRO] G-Code