Re: [CAD_CAM_EDM_DRO] cutting glass ? and router costs

Hi Dave.

I've never seen glass being cut by a CNC machine.

That being said, a very slow feed rate and lots of coolant would be very
important. I know if I try and use my glass grinder without the coolant, I
break the part unless I take *tiny* cuts and let it cool between grinds.

Another glass guy on the group? cool!

JB
Bothell,WA




________________________________________
All outgoing emails from this computer are scanned by Norton Antivirus 2002.

----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, June 19, 2002 6:37 PM
Subject: [CAD_CAM_EDM_DRO] cutting glass ? and router costs


> Hi all,
>
> two questions,
>
> first, has anyone cut glass on a CNC table ?
> is it worth the effort ?
>
> I'm looking at odd shapes for stained glass windows.
>
>
> second question, different topic.
>
> I have to put together a large router table to cut out parts in
> aluminum, up to 1/8 thick. I've researched routers and plasma
> cutters and am wondering if I would be better buying a table.
>
> Techno-isel offers a 4 x 8 router table for $14,000. ready to run.
> I figure my home built unit would cost about half that, but it would
> take lots of time and effort and trial and error.
>
> http://www.techno-isel.com/CNC_Routers/LC_Series_CNC_Routers.htm
>
> and you offer any suggestions ye sage group ?
>
> Dave
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>