Re: [CAD_CAM_EDM_DRO] Rotary axis configuration question.

Hi John

I setup my rotary axis:- steps per degree
I have still got a bit of tweeking to do with it.

Illya

----- Original Message -----
From: "John Guenther" <j.guenther@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, June 29, 2002 10:53 PM
Subject: [CAD_CAM_EDM_DRO] Rotary axis configuration question.


> Good Morning,
>
> I received a Sherline CNC rotary table for my birthday on Friday, and now
I
> am trying to configure EMC to work with it. My question is, do you
> configure it for the number of steps per degree or the number of steps for
> one complete rotation? In the case of my setup with the Sherline rotary
> table, it is 144000 steps per 360 degree rotation or 400 steps per degree.
>
> As I have it currently configured if I issue the command g0 a1 it will
> rotate the table one complete revolution.
>
> John Guenther
> Sterling, Virginia
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>