Re: [CAD_CAM_EDM_DRO] steppers

Yes, you have the choice of 1/2 coil which will leave you with 4 unused wire
to just tape off so they don't short on anything or you can wire serial or
parallel both of which will use all 8 wires. See the stepper white paper on
the Geckodrive site.

Tim
[Denver CO]
Stepper motors, drives, encoders, e-stop switch
http://www.KTMarketing.com.CNC.html

> Can a 2 phase, 8 wire stepper be hooked up to gecko 201? If so what do
> you do with the extra 2 wires?