Re: [CAD_CAM_EDM_DRO] PCB Milling with Protel?

Try the following newsgroup muug@...
for circuitmaker (which is now owned by Protel) someone there may be
able to help.

Cheers, Peter


snuckleton wrote:

> Is anyone milling Printed Circuit Boards created using the Protel 99
> SE package? My question is how to get from a PCB layout within Protel
> to the GCode that would separate the traces. I am using EMC to drive
> the mill.
>
> I found these references on the web:
>
> http://www.lce.org/cnc/ describes using DOS-based? Easytrax and
> converting its output to GCode. (This is in the Files section of this
> group)
>
> http://www.yty.net/cnc/ nice description of using Eagle for
> schematic capture/layout and EMC to drive the mill.
>
> If anyone has other references, especially where Protel is used for
> the PCB layout, I'd appreciate hearing about them.
>
> Thanks
> Art
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>