Re: [CAD_CAM_EDM_DRO] Modeling a twisted blade on autocad?? PLease help!
Posted by
Jon Elson
on 2002-07-25 11:09:03 UTC
Bobby Rastifard wrote:
without any manual intervention. You could stack an indexing head on
a large rotary table on its side, and change the rotary table in steps. Possibly
even turn the indexing head in steps of 15 degrees or so, and have the
program cut the shape from only those positions. That really wouldn't
be that much harder for the usual impeller shapes.
Jon
> I think designing a centrifugal compressor is a bit more easier since theYou only need a 5-axis machine if you want to make the entire impeller
> dynamics involved are a little less complex. BUT, I will have to say that
> CNC machining would require a rather expensive 5 axis machine.
without any manual intervention. You could stack an indexing head on
a large rotary table on its side, and change the rotary table in steps. Possibly
even turn the indexing head in steps of 15 degrees or so, and have the
program cut the shape from only those positions. That really wouldn't
be that much harder for the usual impeller shapes.
Jon
Discussion Thread
bjammin@i...
2002-07-25 06:59:12 UTC
Modeling a twisted blade on autocad?? PLease help!
Keith Rumley
2002-07-25 09:36:51 UTC
Re: [CAD_CAM_EDM_DRO] Modeling a twisted blade on autocad?? PLease help!
Bobby Rastifard
2002-07-25 09:55:47 UTC
Re: [CAD_CAM_EDM_DRO] Modeling a twisted blade on autocad?? PLease help!
Jon Elson
2002-07-25 11:09:03 UTC
Re: [CAD_CAM_EDM_DRO] Modeling a twisted blade on autocad?? PLease help!
John
2002-07-25 11:39:51 UTC
Re: [CAD_CAM_EDM_DRO] Modeling a twisted blade on autocad?? PLease help!