Re: [CAD_CAM_EDM_DRO] Question about angular and linear feedrates

ignoring the difference in unit types it would still be a linear interpolation
on the slope of .5 to 180 so it should take 180.0006944431049 seconds
(or thereabouts :-)

Brian

On Saturday 03 August 2002 12:26, you wrote:
> I would like to know how most (all) control programs will handle the
> feedrate for the following moves:
>
> A-axis is angular with feedrate expressed in degrees/sec
> X-axis is linear with feedrate expressed in inches/min
>
> Assume that I am always starting at X0 and A0 for these moves.
>
> If I command: G01 A180 F1.0 it should take 180 seconds to make the move.
> If I command: G01 X0.5 F1.0 it should take 30 seconds to make the move.
>
> My question is how long should the following move take starting at A0 X0:
>
> G01 A180 X0.5 F1.0
>
> Does it take 30 seconds or 180 seconds?
>
> Thank youf or your help.
>
> Daniel J. Statman, Statman Designs
> www.statmandesigns.com
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
> site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/