Re: Question about angular and linear feedrates
Posted by
superintendent_god_botherer2000
on 2002-08-05 15:20:31 UTC
Hi Alan
but the part program isnt using a radius value
the 'A' move is called out in degrees so those are the
units it should use for the velocity interpolation
I would rather have the control do what its told
instead of letting it assume anything (we all know what
happens when you assume something ;-)
Brian
but the part program isnt using a radius value
the 'A' move is called out in degrees so those are the
units it should use for the velocity interpolation
I would rather have the control do what its told
instead of letting it assume anything (we all know what
happens when you assume something ;-)
Brian
--- In CAD_CAM_EDM_DRO@y..., Alan Marconett KM6VV <KM6VV@a...> wrote:
> Hi Brian,
>
> Well instead of 0, why not have it assume a radius that gives the
same
> feedrate, I.E. with my 3.6" /rev equivalent feed, a 1" dia gives
nearly
> (1.14159", actually) the same feedrate. I haven't tested this!
But I'm
> thinking then even with out a "radius" parm, it would be a simple
mental
> exercise to double or halve (or whatever) the feedrate to adjust for
> other dia's.
>
> Alan KM6VV
Discussion Thread
Dan Statman
2002-08-03 12:28:46 UTC
Question about angular and linear feedrates
Brian Pitt
2002-08-03 14:47:19 UTC
Re: [CAD_CAM_EDM_DRO] Question about angular and linear feedrates
rainnea
2002-08-03 16:50:08 UTC
Re: Question about angular and linear feedrates
Dan Statman
2002-08-03 16:51:46 UTC
Re: [CAD_CAM_EDM_DRO] Question about angular and linear feedrates
Dan Statman
2002-08-03 17:58:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
bsptrades
2002-08-03 21:16:46 UTC
Re: Question about angular and linear feedrates
alenz2002
2002-08-03 21:24:03 UTC
Re: Question about angular and linear feedrates
Dan Statman
2002-08-03 22:16:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
Dan Statman
2002-08-03 22:26:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
imserv1
2002-08-04 06:11:01 UTC
Re: Question about angular and linear feedrates
Dan Statman
2002-08-04 08:42:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
imserv1
2002-08-04 09:08:15 UTC
Re: Question about angular and linear feedrates
Brian Pitt
2002-08-04 14:29:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
rainnea
2002-08-04 14:31:54 UTC
Re: Question about angular and linear feedrates
Alan Marconett KM6VV
2002-08-04 15:13:04 UTC
Re: Question about angular and linear feedrates
Brian Pitt
2002-08-04 15:37:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
cadcambee
2002-08-04 17:02:04 UTC
Re: Question about angular and linear feedrates
Jon Elson
2002-08-04 19:57:59 UTC
Re: [CAD_CAM_EDM_DRO] Question about angular and linear feedrates
Jon Elson
2002-08-04 20:13:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
rainnea
2002-08-05 01:42:57 UTC
Re: Question about angular and linear feedrates
Brian Pitt
2002-08-05 11:04:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
Alan Marconett KM6VV
2002-08-05 12:43:24 UTC
Re: Question about angular and linear feedrates
superintendent_god_botherer2000
2002-08-05 15:20:31 UTC
Re: Question about angular and linear feedrates
rainnea
2002-08-05 15:34:39 UTC
Re: Question about angular and linear feedrates
Dan Statman
2002-08-05 15:41:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
Alan Marconett KM6VV
2002-08-05 16:14:59 UTC
Re: Question about angular and linear feedrates
Brian Pitt
2002-08-05 21:14:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question about angular and linear feedrates
Alan Marconett KM6VV
2002-08-06 10:45:26 UTC
Re: Question about angular and linear feedrates