CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Hardware dual boot method...

on 2002-09-11 14:08:01 UTC
Hi Lee,

What about sectors/heads/cylinders? Your BIOS might not like, unless
the drives are identical!

Alan KM6VV

Lee Studley wrote:
>
> Just an Idea:
> One simple hardware method to get a dual boot setup with 2 IDE drive
> is to get a 4PDT switch and wire it so that it swaps the master and
> slave jumpers on the drives. (Not taking into account differing file
> systems etc.)
> -Lee

Discussion Thread

P. J. Hicks 2002-09-10 09:30:20 UTC Archives and EMC Jon Elson 2002-09-10 22:33:32 UTC Re: [CAD_CAM_EDM_DRO] Archives and EMC Ian W. Wright 2002-09-11 03:00:50 UTC Re: [CAD_CAM_EDM_DRO] Archives and EMC Lee Studley 2002-09-11 14:01:16 UTC Hardware dual boot method... Alan Marconett KM6VV 2002-09-11 14:08:01 UTC Re: [CAD_CAM_EDM_DRO] Hardware dual boot method... Emory Smith 2002-09-11 15:17:06 UTC RE: [CAD_CAM_EDM_DRO] Hardware dual boot method... Ray Henry 2002-09-12 06:14:20 UTC Re: Re: Archives and EMC