Re: [CAD_CAM_EDM_DRO] machine setup for rotary table

Step increment should be set to 0.0125 if you are using 200 step per
revolution motors in 1/2 step mode. If you are getting the proper angular
movement with your command, but it is just real slow then you need to adjust
your start speed and acceleration values.

It would help if you would provide us with the inputs of your configuration
as it currently stands.

Daniel J. Statman, Statman Designs
www.statmandesigns.com

----- Original Message -----
From: "cncuni2002" <cncuni2002@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, September 18, 2002 7:29 PM
Subject: [CAD_CAM_EDM_DRO] machine setup for rotary table


> Hi,
>
> Is anyone out there using the Sherline rotary table? I have tried to
> run the table with turbocnc and g201 and not very sure how to
> configure the machine setup. I notice the motor only ticking along
> very very slowly with the command, for example
> G01 X180 f50
>
> Will appreaciate a "ready-made" configuration. Save my brain from a
> lot of headache-causing number crunching.
>
> Thanks
>
> Peter
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>